La onda es asi, tengo Fiber 6mb. Un amigo paso de fiber 12mb+wifi, a fiber 6mb. Los tipos le dejaron el modem wifi por error, y el no lo necesita. Veo que no se comprendio bien, pido disculpas no fuy muy claro me conecte a fibertel y tengo el modem sin wifi. Pero como yo previamente tenia un encore endsl-a2+4r2.

• Fibertel Mail

Hi all, I finally made it back to BA, and am having trouble setting up my wireless network. I brought a Netgear RangeMax router from the States, updated the firmware to the latest world version, and am still having to reboot the Fibertel modem and my router several times a day. I understand that Fibertel provides static IP addresses, so I plugged directly into the cable modem and wrote down what appeared to be my static IP(v4), subnet mask, router (a.k.a. Gateway?) addresses, as well as primary and secondary DNS addresses. I input all of this data into my router, which I set up for a static IP service, and couldn't get it to work. Now here's the kicker: even though Fibertel is supposed to be a static ISP service, when I set the router to accept dynamic IP and DNS addresses, it works; for an hour or two anyway. Then I have to repeat the process of logging into my router and refreshing the system by fetching new IP and DNS addresses.

My native-speaking girlfriend has been on the phone with Fibertel twice now trying to get confirmation of our IP, subnet mask, router/gateway and DNS addresses, all to no avail. Tally 9 software. Has anyone else had a similar experience?

I'd really appreciate your guidance. Hi, I have had similar problems with using wireless routers here, and its all to do with the way they set things up here ( i setup netowrks, look after email/web/data servers firewalls etc so do know a bit). What i have had to do is set up the router as a access point only.

So connect pc to modem, take note of ip address and netmask the modem gives your pc. If for example the ip address is 192.168.0.10 and netmask is 255.255.255.0, use these to setup wireless router. In wifi router put its ip as 192.168.0.100 and netmask as 255.255.255.0.

Dont set it up for DHCP, or set any DNS, as the modem will still pass those on via DHCP. Connect the wifi router to the modem using one of the lan ports (usually marked 1 to 4 on back) - not the WAN port. Hope this helps. And dont worry about stuffing up wifi router, all you have to do is reset to put back to the settings it came with out of the box. Hi, I have had similar problems with using wireless routers here, and its all to do with the way they set things up here ( i setup netowrks, look after email/web/data servers firewalls etc so do know a bit). What i have had to do is set up the router as a access point only.

So connect pc to modem, take note of ip address and netmask the modem gives your pc. If for example the ip address is 192.168.0.10 and netmask is 255.255.255.0, use these to setup wireless router. In wifi router put its ip as 192.168.0.100 and netmask as 255.255.255.0. Dont set it up for DHCP, or set any DNS, as the modem will still pass those on via DHCP.

Connect the wifi router to the modem using one of the lan ports (usually marked 1 to 4 on back) - not the WAN port. Hope this helps. And dont worry about stuffing up wifi router, all you have to do is reset to put back to the settings it came with out of the box. Realized I do have Fibertel (I just got rid of Arnet), and this exact setup works great for me.

I have a Fibertel cable modem plugged directly into my Linksys wireless router. Also, Fibertel should not be a static service, they should assign you an IP address automatically so your router should be set up as such. Here's a few questions: - what IP address is your Netgear router getting for the WAN connection?

If it starts with something other than 192.168.x.x, then this setup should work properly. (you can find this in the router web admin) - do you have the latest firmware for your Netgear router? Check this on your router and look on the Netgear site. If not, update it.

Did you replace the cable between the two? (probably not the issue, but who knows) - Do you lose wireless access or only access to the Internet? Can you still access the Netgear when the Internet goes down? So connect pc to modem, take note of ip address and netmask the modem gives your pc. If for example the ip address is 192.168.0.10 and netmask is 255.255.255.0, use these to setup wireless router. In wifi router put its ip as 192.168.0.100 and netmask as 255.255.255.0. Dont set it up for DHCP, or set any DNS, as the modem will still pass those on via DHCP.

Connect the wifi router to the modem using one of the lan ports (usually marked 1 to 4 on back) - not the WAN port. Hope this helps. And dont worry about stuffing up wifi router, all you have to do is reset to put back to the settings it came with out of the box. How do you know what to set the IP address to in the wifi router after you´ve checked the IP address and netmask the modem gives your computer?

Also, since Fibertel assigns dynamically, I don´t really understand why we have to configure the wifi router with a specific IP address. Finally, why do you plug the modem into one of the 4 regular ports instead of the WAN port?

These may be 'stupid' questions or I might be mixing everything together! I do not know much about wifi installation. When I followed the steps on the TP-link setup CD, it didn´t work (the error was that the configuration didn´t work), so I reviewed your post. Are you in the Palermo area? Would you be willing to come by to look at the configuration?

Fibertel Mail

I can pay 70 pesos for the hour (it will probably take less than an hour, I´m assuming).

Bueno resulta que instale internet fibertel wifi (modem modelo dpr2320r2).Al principio funcionaba todo normal, tenia internet en la pc y me reconocia el wifi cuando alguien tenia una netbook en casa.pero un dia se me dio por resetearlo desde el botoncito de atras y funcionaba igual, pero ahora no me reconoce el. Bueno resulta que instale internet fibertel wifi (modem modelo dpr2320r2).Al principio funcionaba todo normal, tenia internet en la pc y me reconocia el wifi cuando alguien tenia una netbook en casa.pero un dia se me dio por resetearlo desde el botoncito de atras y funcionaba igual, pero ahora no me reconoce el wifi. Nose parece que se borro.alguien tiene idea de como solucionar esto?o tengo que llamar a la empresa?